ABOUT Gravel Rally

This damper is mainly design for Rally Racing or Rally Cross. In all racing events, road condition of Rally Cross is the most aggressive one. Hence, it means that the shock absorber is the most important utensil during the Rally gravel competition. We develop inverted tube design to meet each different road condition as sandstone, snow or silt. Long stroke and long spring which enable to absorb chassis vibration, aggressively attack from high speed bouncy road and bear extremely G-force when turning. All spring rate setting are tested by Rally Racing team.

Top of the line gravel coilovers.

Inverted monotube design. (McPherson type)

Damper body with 55mm to enhance the structure of products.

Fully ride height adjustment.

Not suitable for normal road or tarmac rally use.

No warranty but it's able to be maintained in manufacturer.

36-level damping adjustable specifically for gravel rally.

Long stroke and long spring.

Steel-made bottom mount to enhance the safety.

All applications listed on our website are for 2WD model unless we specify 4WD.

specification

1. Hardened Rubber Top Mount

This spec comes with rubber top mount
is able to absorb aggressive influence from high speed jump and prolong coilovers' lifespan.

2. Feature Of Inverted Monotube Design

Waterproof, sandproof, dustproof.

It's able to absorb aggressive vibration from harsh rally gravel conditions.

3. Fully Bottom Mount Adjustment

It adopts moveable bottom mount.

Both ride-height and preload can be adjusted from adjustable lower mount. The steel-made lower mount can increase the safety.

4. Damping Setting Adjustment

It comes with 36 way of different damping

to bring the best performance from different road situation.

5. Anti-rust

All threaded parts are coated with Fluorine

to prevent corrosion or adherence.

6. Coil Spring

Rally gravel dampers are equipped with the spring
which have the most perfect spring rate with light material(SAE9254). These kinds of spring are longer and softer than general ones.

7. Strength Structure

Piston rod: φ45mm; its treatment is made by electroplating with material (STKMI3C) to enhance hardness and abrasion.
Shock body: φ55mm; larger shock body; It's able to bear more lateral pressure.
Lower mount: φ63mm; It's able to bear any type of aggressive vibration.

8. Monotube Inverted Design

McPherson type of suspension adopts inverted tube design.
The feature is the strut cylinder is thicker than normal ones. Thus, it provides better stability and durability. It can meet any different road conditions as well as eliminate any extremely vibration.

9. Crash-proof Styrofoam

It uses PU material to produce.
When damper meets aggressive attack, it can reduce heavily bounce and avoid uncomfortable feel when damper is bottoming out.

Top Mount

hardened rubber Top mount

The hardened rubber upper mount is able to eliminate noise, to increases ride quality by 10%, and to extend the life of the top mount.